Sheet metal printing

Four lines have been installed for printing TFS, TPS and aluminum panels, equipped with modern quality control equipment that guarantees continuous and high product quality. The average working capacity of each line individually is 4.500 boards per hour. It is possible to print sheets with a thickness of 0,14-0,50 mm, minimum format 500×700 mm and maximum 1100×950 mm. With our own technical and design preparation, we offer a fully rounded process from conceptual solution, production of offset plates including the printing process. In addition to the varnishing and printing process for our own needs, we also offer this service to third parties for the needs of the food product packaging industry and technical content.
Four lines have been installed for printing TFS, TPS and aluminum panels, equipped with modern quality control equipment that guarantees continuous and high product quality. The average working capacity of each line individually is 4.500 boards per hour. It is possible to print sheets with a thickness of 0,14-0,50 mm, minimum format 500×700 mm and maximum 1100×950 mm. With our own technical and design preparation, we offer a fully rounded process from conceptual solution, production of offset plates including the printing process. In addition to the varnishing and printing process for our own needs, we also offer this service to third parties for the needs of the food product packaging industry and technical content.
Planet

Technical data – Sheet metal printing

SHEET THICKNESS
0.14mm - 0.50mm
MINIMUM FORMAT
500mm - 700mm
MAXIMUM FORMAT
1100mm - 950mm
CAPACITY
4500 boards/h
LACQUERING AND SHEET PRINTING PLANT